Lav Mic Repair

Do you have a lav mic with a bad connector? I can get it back in working order with a short turnaround and a reasonable cost. Location Sound work requires durability and reliability so I ONLY use quality name-brand parts. Price differences are strictly due to the cost differences of the connectors. My labor rate is the same regardless of the connector. Email me for a repair authorization before sending anything in for repair.

Lav Mic Repair - $45 + cost of connector
Repairs are available for lav mics with the following connectors:

Disclaimer: Lavs sent in for repair will first be diagnosed to determine if the connector is the issue or if a break exists near the head/capsule. Lavs with breaks at the head/capsule are not repairable at this time and will be returned for only the cost of shipping if the original connector is determined to be good. If I proceed with a repair on an obviously broken connector and I then discover there is also a break at the head/capsule, I will refund the labor cost but the cost of the connector will still be charged.

ta5 connector lav mic repair
ta5 connector lav mic repair
lemo 3 pin connector lav mic repair
lemo 3 pin connector lav mic repair
locking 3.5 mm trs connector lav mic repair
locking 3.5 mm trs connector lav mic repair
ta4 connector lav mic repair
ta4 connector lav mic repair
TA5 - $7

Lectrosonics

Lemo 3-pin - $40

Zaxcom, Lectrosonics, Sennheiser, Shure, Wisycom

TA4 - $7

Shure

3.5 mm TRS, Locking - $17

Sennheiser, Tentacle, Deity

Don't see your lav's connector listed?

Just email or call/text and I'll do my best to get your required connector in stock.

Custom Cables

Custom cables and multi-cable harnesses for your mixer bag, camera interfacing, etc. are at your fingertips. As a working sound mixer I fully understand the importance of having your rig outfitted in an orderly manner. Excessive cable runs in your bag can wreak havoc in times of on-the-fly troubleshooting and excess cabling on a camera build is just asking for trouble in fast-paced environments. Keep it tight and get it right with a custom cable or harness made to your exact specifications. Just give me a call at 817-903-7940 or send an email to Michael.Lile@gmail.com to get your custom build started today.